博世DS7400Xi 系列可编址控制主机
分类: 博世系列  发布时间: 2015-10-07 12:01 

博世DS7400Xi 系列可编址控制主机
1、多达 248 个防区，分布在八个分区内
2、记录 400 个事件的缓存
3、多达 200 个人员 ID 编号 (PIN)
4、多达 112 个无线设备
5、多达 15 个键盘和/或门禁模块 (DACM)
6、多达 240 个可编址地点，包括多达 60 路输出
7、以太网连接
8、通过串行接口、以太网或电话线进行远程编程
Number of Circuits: 8 circuits on board
End of Line Resistor: 2.2 + 1.5 kΩ
Operating Temperature: 0°C to +49°C (+32°F to +120°F)
Fire circuits will work with two-wire or four-wire detectors and have optional alarm verification.
Number of Circuits: 8 circuits on board, expandable to 16
Type of Circuit: Class B, latching
End of Line Resistor: 2.21 kΩ
Supervisory Current: 5 mA
Minimum Current for Alarm: 12 mA
Maximum Short Circuit Current: 22 mA
Maximum Circuit Resistance: 60 Ω
Circuit Voltage Range: 8.5 VDC to 14.1 VDC
<123>

图片

DS7400Xi 系列可编址控制主机
 
 
 
 

产品变量

 
 
Maximum Impedance for Alarm: 1000 Ω
Maximum Detectors per Zone: 20 detectors (two-wire)
Total Detector Standby Current: 2.5 mA
MOVs and spark gaps provide suppression of lightning surges and static discharges.
The system provides three programmable outputs that can be controlled by alarms, access control, ground start, smoke detector reset, or the control’s arming state.
Alarm Output: Normally Open, 1.75 A contact connected to auxiliary power.
Programmable Output 1: Solid state current sink (1 A maximum). Can be used for alarm, arming state, or access control.
Programmable Output 2: Solid state voltage source (500 mA maximum). Can be used for alarm, arming state, or access control.
Input: 18 VAC, 50 VA, 50 Hz or 60 Hz
Total Power Output: 12 VDC, 2.5 A
Keypad Regulated Power: 12 VDC, 1.0 A
UL Listed Auxiliary Power: 12 VDC, 1.0 A
<123>

图片

DS7400Xi 系列可编址控制主机
 
 

 

 

 
Maximum Impedance for Alarm: 1000 Ω
Maximum Detectors per Zone: 20 detectors (two-wire)
Total Detector Standby Current: 2.5 mA
MOVs and spark gaps provide suppression of lightning surges and static discharges.
The system provides three programmable outputs that can be controlled by alarms, access control, ground start, smoke detector reset, or the control’s arming state.
Alarm Output: Normally Open, 1.75 A contact connected to auxiliary power.
Programmable Output 1: Solid state current sink (1 A maximum). Can be used for alarm, arming state, or access control.
Programmable Output 2: Solid state voltage source (500 mA maximum). Can be used for alarm, arming state, or access control.
Input: 18 VAC, 50 VA, 50 Hz or 60 Hz
Total Power Output: 12 VDC, 2.5 A
Keypad Regulated Power: 12 VDC, 1.0 A
UL Listed Auxiliary Power: 12 VDC, 1.0 A
<123>

图片

DS7400Xi 系列可编址控制主机